transense copper
Dedicated to providing customers with a full range of special copper tubes solutions
Add to Cart
CU-DHP Heat Exchanger Tube Used In Seawater Cooling And Distillation
Product Description
Specially designed finned section, which form evaporation core in the flooded evaporator during the evaporating and help accelerate the evaporation. The heat exchanes efficiency is enhanced by the special design Furthermore, enhancement of the inside surface of the Heat Exchanger Tube reduce forming the thermal resistance on the inside surface of tube and the heat exchange efficiency is improved a lot.The surface of the Heat Exchanger Tube is densely covered with micropores, and the lower part of the evaporating hole is connected with a groove..
Application
Heat Exchanger Tubes suitable for full night or falling film evaporators.The Heat Exchanger Tube especially suitable for flooded evaporator in the central air-conditioner centrifuge, water-cooled screw chilled water units, the shell heat exchansger.Evaporator tubes is broadly used in seawater cooling and distillation, for instance solar distillation, vacuum distillation, multi-stage flash distillation, multi-effect distillation, wave-powered distillation and vapor-compression distillation etc.
| Heat Exchanger Tube Used In Seawater Cooling And Distillation | |||||||||
| Item | Light tube | Wing fragment | |||||||
| O.D. | O.D. | Wall Thickness | minimum Wall Thickness | Ridge Height | Nominal outside surface area | actualoutside surface area | Nominal inside surface area | Nominal inside surface area | |
| mm | mm | mm | mm | mm | ㎡/m | ㎡/m | ㎡/m | ㎡/m | |
| 1 | 19.05 | 18.85 | 0.635 | 0.56 | 0.38 | 0.0598 | 0.2056 | 0.0529 | 0.0901 |
| 2 | 19.05 | 18.85 | 0.711 | 0.63 | 0.38 | 0.0598 | 0.2056 | 0.0526 | 0.0901 |
